 |
Silent Steel 280 Series
The model 280 steel fireproof unit is used on the majority of stage installations using heavy weight curtains. Steel is 14 gauge galvanized steel. Track Only.
|
|
.jpg) |
Single Carrier for 280 Series Curtain Track
Carrier Spacing: 12". Block Constructed of fireproof nylon material supported from ball-bearing with 2 heavy duty polyethylene wheels. Plated Swivel for Free, Effortless Curtain Movement. Trim Chain Supplied for Curtain Trimming. Combined Carrier and Bumper Width: Apx. 2". Length from Bottom of Track to Bottom of 5 Chain Links: Apx. 9 1/4"
|
|
 |
Master Carrier for 280 Series Curtain Track
Block constructed of plated steel supported from 2 ball-bearings with 4 heavy duty polyethylene wheels and 2 cable clips which clamp cord to carrier.
|
|
 |
Live End Pulley for 280 Series Curtain Track
With 2 oil-impregnated sleeve-bearing super tough nylon wheels. Steel block of underhanging type anchorable to any position under track without drilling. Pulley Width: Apx. 4"
|
|
 |
Lap Clamp for 280 Series Curtain Track
For attaching double-sectioned track at center over-lap.
|
|
 |
Hanging Clamp for 280 Series Curtain Track
Recommended spacing: 7'. Chain or cable suggested for track suspension. Adjustable to any location. Turnbuckles and /or pipe clamps recommended for long and heavy curtain installations.
|
|
 |
End Stop for 280 Series Curtain Track
Prevents carriers from moving beyond selected position in track. Horizontally attached bolt should be used in conjunction with pivot arms.
|
|
 |
Splicing Clamp for 280 Series Curtain Track
Two piece 11 gauge clamp for joining and extending track sections assuring proper alignment of track channels. Sold in pairs only.
|
|
.jpg) |
Ceiling Splicing Clamp for 280 Series Curtain Track
Two piece 11 gauge steel clamp for joining track sections assuring proper alignment of track channels.
1 pair - 2lbs. 14 oz
Approximately: 12" long x 7/8" wide x 2-13/16" High
Note: For Cieling Mounted Tracks Only.
|
|
 |
No. 12 (3/8") Cord
Synthetic center and stretch resistant.
For manually operated tracks.
No. 12 (3/8"diameter)
|
|
 |
No. 8 (1/4") Cable
Wire center Cable
Used with wheel-driven machines.
|
|
 |
Back-Pack Guide for 280 Series Curtain Track
Provides sliding door effect, prevents curtain from accumulation in gathers until track ends are reached.
|
|
.jpg) |
Dead End Pulley
Equipped with 1 oil-impregnated sleeve-bearing super tough nylon wheel. Same type block as Live End
|
|
 |
Adjustable Floor Pulley
with 1 oil-impregnated sleeve-bearing super tough nylon wheel. Adjustable up to 9".
|
|
 |
Floor Pulley
Non adjustable type with 1 oil-impregnated sleeve-bearing super tough nylon wheel.
|
|
 |
Tension Floor Pulley
Equipped with 1 oil-impregnated sleeve bearing super tough nylon wheel. Tension spring provides cord tautness. Can be either wall or floor mounted. Spring-loaded latch maintains wheel in uppermost positions during cording. Available in Stainless and Black
|
|